In order to effectively solve the faults of the breaker machine, the experts of Henan Hongxing Mining Machinery have some common faults and solutions for the pendulum grinder.
If the production efficiency of the pendulum grinder is too low, there may be following reasons. First, the rotating speed of the drive shaft may be too low. The motive power is insufficient. The tape may be too loose or badly worn. Second, space between the abrasive disc is too small, which affects the flow. You should appropriately transfer the spacing. Third, the grinding teeth are too blunt. If the grinding teeth are worn seriously, you should timely replace them. Forth, the screening efficiency of the screen device is too low. You should check and clean the screening components.
The temperature of the powder is too high, which will affect the quality of the powder. There may be the following reasons. First, the rotating speed exceeds the rated indicators, which generates too great heat so that the temperature of material high. Second, feeding is excessive, which will increase the load. Third, the spacing between the abrasive disc is too small so that the power consumption increases, which will make the temperature of the materials rise. Forth, the moisture content of the materials is too high and the flow of materials deteriorates. The power consumption is large.
If the grinding is too rough, there may be the following reasons. First, the sieve may be too thin or damaged. The grinding gap may be too small or the grinding teeth are too sharp. Second, the moisture of the materials is too small. Third, the material flow is too small and the grinding material may be too fine.
The rotation of the bearing is not flexible, which will cause the temperature rise. There may be the following reasons. First, there may be too much dust in the bearing, which will affect the rotation. The transmission belt is too tight, which will make the bearing heat. Second, the too large flow, small grinding gap and too high moisture of the materials will cause too great load of the machine, such as the ball mill.
